CALL US (+91) 8130801082, +91-9582692363
Clarifiers are settling tanks constructed with mechanical methods of constant removal of solids being deposited by sedimentation. Concentrated impurities, discharged in the bottom of the tank are Called sludge, whereas the particles which float into the surface of the liquid are known as scum
. All these reagents cause finely suspended particles to clump together and form thicker and larger particles, known as flocs, that settle faster and stably. This permits the rest of the solids from the clarifier to happen more efficiently and readily; helping in the conservation of energy.  Isolating the chemical parts first employing these procedures may lower the quantity of downstream water treatment procedures like filtration.
We are designer for mechanical and process for sugar industry and water industry last more than 20 year.
Our design mainly related with latest SRT clarifier Floating type clarifier and decolourization in sugar industry. Our decision SRT clarifier result is 100% in sugar industry.100% automation.
We also provide consultancy and material supply erection of 200 TCD plant with themo pack or steam turbine (Single stage and air cool without gear drive ) running on saturated steam with boiler .
The target of this study was to study the procedure for sugarcane syrup generation for the community. The clarification process was asked to decrease particles from sugarcane juice until heat to make syrup. In this function, we examined the turbidity, colour, pH and sensory investigation to find out the clarification effect because of three clarifying representatives: lime, bentonite and activated carbon. The analysis of caution by liming revealed that adding lime to pH 7 decreased the turbidity more powerful than people to pH 8 and 9, along with the analysis of incorporating bentonite at 3 percent (w/w) led to turbidity which wasn’t significantly different (p>0.05) from people including at 5 and 4% (w/w). Additional caution by powder activated carbon in 0.1 0.2 and 0.3 percent (w/w) following liming to pH 7 and 3 percent bentonite suggested that the growth in activated carbon material resulted in the decline in turbidity and colour. Sensory evaluation revealed the colour likeness of syrups from juices explained by 4 distinct remedies was in the assortment of 4.78-5.84 in the scale of 7.
We introduce such design first time in India .This design is capable unimaginable result in sugarcane process industry.
Raw water juice has turbidity more than 1500 NTU and PG in between 4 and 5 after clarifier we will achieve turbidity less than 10 NTU. Sugar cane juice colour also decrees. We will maintain ph 7
We use any clarifier for separation of mud from sugar cane liquid in clarification process.
Due to short retention time sugar loss reduces.
Juice turbidity is low and output colour is reducing.
Flocculation is low and the mud is of high density.
Our company convert 4-4-4 type clarifier to (SRT) in India
Purpose of any clarifier : A clarifier is used to separate out the solid suspended in cane juice .These solids originate from sand adhere to cane stalks as wellas from material inherent in the cane stalk .This separation take place take place by allowing the solid particles to settle out onto a try.The solid are swept from the tray into a mud compartment from which its pumped to filter.
Multi tray were popular in past nowa days all new installation use SRI (try less clarifier) use .
We are pioneer and manufacture of low retention time clarifier. a special design feature of our (SLRTC) is phrephial fed down take with of launders. This allows a more steam lined well guided juice and mud flow pattern without causing any short circuit/turbulence across any section of slrtc,